the 2 piece base front mount & rear mount holes are the same for all 10 & 110 guns, the only change is the space between front and rear on the long and short actions when using a one piece base.
Is there a difference between the distances in the base mounting holes on a model 12 and a 308 f/tr gun. Buddy of mine has a few extra sets for his 308 ftr and I was wondering if they will work on my model 12
the 2 piece base front mount & rear mount holes are the same for all 10 & 110 guns, the only change is the space between front and rear on the long and short actions when using a one piece base.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
I noticed on their site that they listed a target rifle base and one for a model 10 action. I just didn't know what the difference would be for a one piece base. Are the model 12 holes and model 10 holes different?Originally Posted by Blue Avenger
All short actions have the same spacing for a 1 pc. mount.
"As long as there's lead in the air....there's still hope.."
You have to also watch Flat old and new Round back receivers.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks