By barrel here on SS.com $65 in the classifieds.
http://savageshooters.com/SavageForu...c,48940.0.html
Buy complete bolt from Midway $110+.
http://www.midwayusa.com/product/175...t-ejector-blue
Swap out ejector, spring and retaining pin into the new bolt.
If it is a Center Feed... slowly tweak magazine to fit. I place one round in the Magazine, measure from the top of the case to the rear edge of the magazine. then I adjust it until the 300WM case is at the same height. Not sure if that works for the Stagger Feed.
Load cartridges in gun and point in a safe direction. Squeeze trigger.
Good Luck
Bookmarks