On another note, don't waste your time with the crap with built in aluminum bedding blocks...

When its molded if that block is not EXACTLY dead center in the mold, you will have to keep grinding out more then you should to give your barrel the appearance of being in the center when you float it. Remember when you buy a $200-300 stock, excluding laminate that is exactly what you get... Since Laminates are filled with layers and layers of glue and wood.

Also if you plan on bedding it in one of these stocks you hear so much bout here just remember you need to GRIND out all of the crap foam above the block to get a REAL bed, had a jack ass do a skim coat and thats exactly what it was a skim coat crap. Had to redo it ALL cause it never was solid and same with the pillars...

JMO go with a Laminate or a Manners and never look back...