Quote Originally Posted by Grit #1
If you have to use a spray, try the Dillon spray lube. I have be using it for years. I dump my brass, several hundred at a time into a clean cardboard box, then spray and shake a couple of times and let dry. I have never stuck a case using it. When I am loading for long range work I still use the Imperial. I just keep my right hand fingers covered with a really light film and twist the case in my fingers before it goes into the die. If you get shoulder dents you are using WAY to much.
Best regards,
Grit
Yep, that is exactly how I do it with the Imperial.

I've been thinking about buying some of the Dillon spray for use on .223 through the progressive press.