Things to check that may help. Are the scope mount screws tight? The very front screw may be hitting the barrel and not holding the mount down tight. Are the action screws tight? Is the barrel free floated? After checking the afore mentioned stuff run a pc of paper down the barrel channel to see if the barrel is touching the stock. If it is, loosen the mounting bolts and wrap some paper around the barrel and tighten the screws, then remove the paper. If that doesnt work then you have to determine where the barrel is hitting the stock and sand it out, probably full length is best. If a wood stock, oil the bare wood to seal it. If still no improvement come back here for more information.
El Lobo
Bookmarks