Hi gang,

I bought a 12FV about ten years ago and later picked up a used wooden laminate stock for it. The stock was already inletted for the Savage and looked exactly like the BV series stock on Savage's website at the time.

Only problem is, the factory FV front action bolt won't fit (too short), and the "Savage Model 12 Laminate Stock Front Action Bolt" that I just got from Midway is the same -- too short.

Can anyone advise on a Savage part number, place from which it cane be aquired, etc for the correct bolt? The former owner of the stock sent a long his "front action bolt" which turned out to be a long flat-bladed bolt with a couple washers on it....

Final question... What's the recommended to torque for the front and back action bolts?

Thanks!!!