check my coal in the new barrel for 80gr amax i get

2.433 coal
and
1.868 touching lands to ogive

i've been looking at oal's in the my reloading books and online (load data and such ) and come up with anywhere from 2.280 to 2.550 for a coal which to me is a wide spead so time to sak someone who has loaded these (80gr amax) with my coal of 2.433 and ogive of 1.868 would you try loading these or are they going to be seated down to far into the case . looking at these powders/ cases

lapua brass
varget 23gr start
imr 4064 22.0 gr start
aa2520 23.5 start
then work up from there i try to stay away from compressed loads as much as possible but with the longer head i'm sure it will be need at some point.