I have decided to try bedding my rifle. So far i have roughed up all the surfaces that will recieve devcon, taped off and added clay to any of the areas i do not want it to go, added tape to take up any slack in the faux action screw, added some tape to the barrel to keep free floated and centered in the stock and taped the bottom, sides and front of the recoil lug. What should i do to keep the devcon from sticking to the inside of the action, tape? I still need to add the kiwi shoe wax to the action, screws, etc what is the best way to apply the wax? I will add some pics to show what has been done. Please feel free to point out anything i miss. Thanks

[img width=600 height=448]http://i232.photobucket.com/albums/ee18/adam330/IMG_88621.jpg[/img]

[img width=600 height=448]http://i232.photobucket.com/albums/ee18/adam330/IMG_93501.jpg[/img]

[img width=600 height=448]http://i232.photobucket.com/albums/ee18/adam330/IMG_79311.jpg[/img]

[img width=600 height=448]http://i232.photobucket.com/albums/ee18/adam330/IMG_33051.jpg[/img]