Last build complete/Quick on/off muscle brake.

[img width=600 height=449]http://i311.photobucket.com/albums/kk460/emeraldislandlover/SavageFamilyofRUMS.jpg[/img]

I just finished the 375RUM on the left. 338 Edge, 300 RUM and Lisa's 338 WSM
Benchmark 19" 3 groove barrel and if you look close you can see a shiny spot on the bottom of the muscle brake.
Benchmark barrels took on the muscle brake on put a collar with screw so any and everyone can attach the muscle brake and orient it.

I have shot it 25 times and since its a Benchmark barrel it is boringly another one holer!
Nitrided everything and I might add that I built this to shoot nothing but 235gr Barnes bullets. The throat was cut with a reamer for 300grMK's so I am able to seat the Barnes bullet flush with the bottom of the neck. An average of well past 3000fps with 100grs of Rel17 is the standard.

[img width=600 height=450]http://i311.photobucket.com/albums/kk460/emeraldislandlover/OurBobcat.jpg[/img]

I am now gearing up to spend the next 2 years developing my remote cabin site here on Kodiak Island. We bought a Bobcat skid steer with multiple attachments. The cabin will soon be a house so we can spend my time on our salmon stream and shooting the deer and goats on our own property. In addition to the two salmon runs up the stream we have both crab and halibut 600 yards from our beach in deep water. 2 miles of shooting range (ocean) in front of the cabin and as soon as I get the skid steer down to the cabin I will have a 500 yard corridor out my back porch/loading room.

I have to put the 26" nitrided 224 minicoop barrel on and action with rifle stock and do some velocity testing. SHould be running the Barnes 45 grain brass bullet at around 5300fps!

Neal