Finally got my 270 out today to test some loads.

130 GK and 95 gr TTSX.
All over RL17.

I sighted the rifle in with the 130 GK's which were shooting excellent. 3/4" or so with an occasional through the same hole.

Figured the 95 gr TTSX should be shooting a bit higher which it was but it was shooting about 5" to the right.

I have had that happen before with different rounds, but not to that degree.
I assume it is torque but I dont really understand it and why it is that much difference.

Both were max loads. The 95 gr about 3600 and the 130 about 3150.

I did not chrono the loads that is just from data.

I has a rear bag and a front rest, and was shooting basically standard style, good cheek weld, semi firm grip, light forearm grip.
I had intended to use the same scope setting for these loads but looks like that may not work.