I just purchased a new Criterion (read that Krieger with button riflings) barrel (28", 1:10 twist, bull, match, small flange).

Rifle
Savage 10FP LE (current barrel is stock 24", 1:10 twist heavy, small flange)

Tools I have
Wheeler Engineering Action Wrench #2 Remington 700, Savage 110
Wheeler Engineering Barrel Nut Wrench Savage 10, 110 (w/ 1/2" torque wrench holes)
A great workbench with large Irwin vise

My questions are these.

1) What torque in ft lbs should I use?
2) Should I put anything on the threads, blue loc-tite? red loc-tite? anti-seize compound?
3) Is there a good video on this type barrel swap anywhere? I believe I can chuck the action into action wrench with the action wrench locked in my bench vise. This should give me a stable platform for loosening the barrel nut wrench for removal of the old barrel and also for installation of the new barrel.

Any further assistance anyone can give will be appreciated?