This is my 1st 6BR, and my 1st aftermarket barrel. I'm going to attemp to use 105 berger VLD's over H4895 with CCI BR4 primers. Anybody try this? I have a 8 lbs jug of 4895 I need to use up. Then I may switch to varget or something.


Anyone know what the max load is supposed to be on this? I think hodgdon says 27.5, and sierra says 28.5 both for 107's. But, I found loads on 6mmbr.com that used 29.0 and 29.5. So I'm guess I should just start around 10% under say 30 gr and work up and see what I get. I'll be using HBN coated bullets, so I may need a little more powder to get the same results.

Thoughts?