Hi folks! Need some info. I just noticed that the face of the bolt in my .300 wsm protrudes about 1/8" into the chamber opening (where you insert the cartridges from the top) when the bolt is opened all the way. I looked at my Savage .22-250 and .243 and when you open those bolts all the way, the bolt face is flush with the rear of the chamber opening. I did compare the length of all the bolts and the .300wsm is longer by the same amount of the protrusion into the chamber. When I put the bolts from the .22-250 &.243 into the.300 wsm they fit flush with the rear of the chamber opening. Is this normal?? (things like this drive me nuts). THANKS!