OK, now I do have some experience in this area as I have built 3 Savage rifles for 600 - 1000 yd shooting.

This year my 110 chambered in 6mm CM, with a Krieger barrel was working just fine then it quit. I have done the extractor replacement and larger size ball bearing and spring.

My issue is when pulling the round out of the chamber slowly the case will drop ff the bolt face about 50% of the way back.

Now if I do a fast eject no problems.

Looking at my other Savage extractors they all look the same

Now before I order another Kinney's extractor kit I thought I would post here and maybe some has a better idea.

Thanks in advance.