Originally Posted by
XOCLOCK
My Mag rating - 2.5.
New forum member here!
My reason for rating a 2.5:
Cons:
No extended mags-My Biggest complaint, I wish they used 10/22 mags.
The 25 round BC mags work fine - I have 2x
No aftermarket magazines. SEE ABOVE - NO Need of 'other' mags.
Slow mag changes - hopefully I will improve with practice. You will.
Can be stiff to load and have finger cutting edges.
If you 'un-wind' the mag-spring a bit, it's much easier - see (my doc) Below
Take a file and 'round' the edges a bit - 5-min job.
PS - If you 'polish' ALL friction surfaces lightly with 600g or 1000g w/d paper you'll find everything will run smoother, too. The Bolt-Guide-Rail might 'scratch' bullets in the mag so it's advised to 'round' that leading edge, I just went about 1.5" back to make it smooth, too.
Bookmarks