I used pre fired Hornady brass , Federal Champion 215 primers , Magpro powder with 162 Hornady ELDX Match bullets .

I used Hornady's load data , I did ten of each , 60 , 62.4, 64.8, 67.2 and the max load of 69.6 grains .

I measured to the lands and my OAL was 3.420 . The OAL jumped around a bit as I went through the process , from 3.422 to 3.418 , not sure how or why ? Maybe my cheap calipers ?

I used the RCBS Matchmaker Dies , pretty slick really . [IMG][/IMG]