Quote Originally Posted by Fuj' View Post
Have a new MDT ORYX build going on myself presently. This one will be more then
a cool factor, and for UBR bench work. As for magazine mods, it will be only to add
a center block so I can use the center screw on a PTA. Somewhere in these forums
I have an old MDT HS3 build. It won me a few match's, but a consistant 1/3rd MOA
lost me some. Have to have it tuned for 1/4 or less. I think this one I'll shoulder up
a Hart with my 284-ELF. Having Protekor do another bag. Seems every build needs
it's own rear sleigh....
im assuming you are talking about the savage target action, single shot with the 3 action screws? If so how much is gained buy the use of that center screw? Pretty sure the FCP/BA action (like on my rifle) is the same action BUT with the bottom milled out for the magazine. It is cut to ONLY work with AICS magazines. No way could this action function with a OEM savage magazine.

Had to look thru my photos. Didn't get a photo of the magazine cut out but here is one showing pretty much just the action