Long story short, I've been playing around with this LWH in 6.5CM for my son. Initially had it in a Boyds, and fought it off and on for a year, never able to get really consistent accuracy. Come to find out, theres a small crack in the stock at the rear action screw.
Got it back in the OEM stock, and things were going much better, but I really wanted a "nicer" looking stock. I ended up ordering a Bell and Carlson. Specifically, "Sporter Style, Detachable Magazine, Short Action with Bottom Bolt Release (#1007-97)"
The mag from the OEM stock doesnt fit, and if I tighten the action screws down very tight, it binds the bolt up and it wont function. So, it looks like the stock was meant for the addition of bottom metal that I do not have?

I found this link https://www.savageshooters.com/conte...ottom-Metal-Pa

So, to convert my LWH to work with this B&C stock, do i need to just order (SN- G901181) bottom parts. Will I just need the stainless metal frame assembly and metal bottom bolt release trigger guard? Will I need a different magazine as well? Are there other aftermarket options that would work as well?

Thanks, and please ignore my stupidity when it comes to this stuff!