The factrory recoil lug as installed on my Savage Model 10 FCP-SR with accu-stock has a flat machined recoil lug (definitely not stamped). There is no alignment stud or pin, although there is a notch cut into the face of the action for one. I have found tools for aligning the lug on a REM 700, but not specifically for a Savage. Looking at the NSS tools page, their action wrench has a cutout for the lug and presumably it will serve as an alignment fixture.(??) But I wonder if it provides a snug enough fit around the lug for a near perfectly square alignment to the action. http://northlandshooterssupply.com/w...ION-WRENCH.jpg http://northlandshooterssupply.com/tools/nss-tools/

I considered ordering the thinnest PTG recoil lug (0.187") with an alignment pin, but the lug slot in the accu-stock is only 0.184" and I believe the lug is too long as well. So that pretty much leaves me with finding a method/tool to squarely align the flat factory lug.

Thoughts or recommendations?