I have been using CCI 250 large rifle mag primers for all my large rifle needs for a several years now. I never had an issue till now.I bought a CVA break action compact 7mm08 from Bud's ,and got around to shooting it today.I was shooting 139 Interlocks over 46 gr H414,and the CCI 250 .I was very pleased with the trigger pull,and can tell the gun will be plenty accurate for my needs. I was very disappointed by the fact that on about 1 in 5 shells I got a light strike.They all fired on the second attempt. I was also thinking maybe the cases were sized down too much,but if it were an issue with sizing would they have all fired on the second try? I can only get CCI,and Winchester primers in town.Are the CCI 200 softer than the 250,or should I switch to Winchester? .The rifle cocks really lightly compared to my Henry break action 223,but I think it is just the nature of the gun..I appreciate any advice you can offer.