Ok, fist time posting and all. Here goes.
I finally came to a decision on what my needs/wants are in this rifle and I need some advice on how to best put this together.
My requirements are: a Savage long action with a large bolt knob, a 30.06 heavy fluted barrel with a 1:10 twist 20" long. I'd like to put this in a McMillan A-2 or A1-3 stock. I know about my optics and trigger so no issues there.
My questions are...
How to best go about getting the action and bolt knob?
Where to get a barrel like this and should I go stainless or chrome moly as I will be shooting in cold temps up here in AK?
What diameter should the barrel be to be close to the 10fp profile or maybe a little larger?
Is 1:10 in a 20" going to stabilize a 180gr projectile enough? ( I think so, just would like to get some feedback)
Is getting a detachable mag with this setup possible without breaking the bank?
I plan on having a smith install the barrel and true up the action, just FYI.

Kindest Regards,

Mountiantrekker