Jeff at CDI has been great to work with. I'm still putzing with some issues and trying to figure them out; advice appreciated. CDI DBM on a Boyd's AT-ONE stock. Left hand Axis in 223.

1. Some rounds get pushed straight forward and do not feed. They catch on the ramp and are stuck. If I push the bolt hard it can force the bullet into the case.

2. When the top round does feed the rounds still in the mag get pushed nose down into the magazine. If I understand Jeff correctly, the bottom edge of the bolt needs to be smoothed out. Thoughts? Videos so I don't mess it up?

Thanks!

Leam