Hi guys. I'm a new Axis owner and I've slotted the action into an MDT LSS chassis. I have no problems with the fit, but I found that after I release the trigger I have an enormous amount of play in the trigger group until I re-cock. I can squeeze on the trigger and force the safety to rock up and down. Everything is snugged down so I don't suspect any loose attaching points.

I disassembled the rifle to see if I could determine what the problem was, and my suspicion is that since the trigger group is sort of free floating on a single pin, the LSS stock isn't exerting enough (or any?) pressure on the front of the trigger group, leaving the whole thing to just sort of waggle around the pin which holds it in place.

Do you suppose shimming the front of the trigger group where the body lug attaches with a thin spacer or two would be the right way to solve this, or would this introduce some unforeseen problems?