When I try to reduce the trigger weight as far as it will go, the trigger will not stay cocked manipulating the bolt with the action mounted. Work the bolt, and the trigger feels locked up, jammed. Zero movement. Out of the stock, no problem. Trigger functions fine, sear cocks and holds in place, fires no problem. Put it back in the stock, wont work. Crank the weight back up, about 2 little coils worth, and it works again.

Have another model 10 action mounted in an A5 stock, no issues with that one. You can wind all the little coils all the way in, right up to the stops, works fine.

So, what is causing this issue with the accustock?

And FWIW: Tried to order some "target" springs from one of the vendors that advertises here, and it looks like they just sent stock springs instead. Same size wire, same number of coils. WTF? Installed it anyway, actually made it worse, poundage went up slightly from the broken in factory spring.