Hello,
I have a Steven's 200 tupper ware stock with plastic trigger gaurd,
I picked up a Boyd's wood stock and the plastic trigger gaurd is too thick, as it stands out of the stock about 1/4 inch, are the wood stock Savage trigger gaurds thinner than the Steven's plastic stock trigger gaurds?
I have filled it down, but there is a aluminum washer embedded in the plastic, and I would have to file it completely away to get it to sit flush, and at that point, I believe the action screw would pull thru, as in there would no longer be any contact point for the bolt head to hold onto.
Any help, would be great.
Thanks