Thoughts? I'm using a steel .267 bushing in a redding FL die with new Lapua brass- 6mm BR with Berger 80's and 105 VLDs.

After sizing and seating the top of the neck measures .2695 using a Hornady electronic caliper; The caliper measures to the nearest half of a thousandth i believe. I'm not sure whether it's more towards .270 or .269, but assuming exactly in between is this too tight? How much clearance do most allow? I don't have any turner's and the barrel is no-turn. It's a pretty tight bolt close but it will close.

Jake