I have had a squiz around the forum, read the Faq and put in search terms like accutrigger/failure/jamming but to no avail.

I have had the fcp for about 6 years now but it is starting to have a trait that is getting worse.

After putting a round in the chamber (after firing) the accutrigger remains immovable and the trigger is not able to be fired. If you cycle the bolt up then down (without pulling back) the accutrigger becomes able to be moved and the trigger can be fired resulting in a successful mechanical action.

What is failing here and how can I fix it?

Is it the firing pin not cocking and the bolt needing a pull apart (not that I know if that can be done) or is the trigger much faulty?

Only happens after firing so I can't bench replicate it. My fcp is my pride and joy out of all my savage rifles.

Sent from my SM-G935F using Tapatalk