I bought my 110 7mm rem mag in a BA chassis for long range shooting and unfortunately it came with a hunting barrel that was not even half an inch at the tip



it had a good scope on it and other than the barrel it was a good starting point. I used the time it took me to be ready for the barrel to put some rounds through it an develop good technique and managed to get it to shoot ok.



but it was very inconsistent with lots of 'flyers' even with hand loads and Sierra match king bullets and fouled a lot.

so I took it to a local gunsmith and had a Stainless match grade barrel fitted and it is finally doing what I wanted from it.





this is 5x 2 shots then clean during break in, single shots are my first single shots dialling the scope back in, don't mind the height variation I was not trying real hard at this point to aim



so 5 hrs later I did 2x5 shot strings, first five was me settling in, 2nd set was perfect