Bought a model 111 6.5-284 norma barrel and been fighting reloading this ever since tried two different sets of dies from different mfg and still cannot get the bolt to close easily. I tried modifying a shell holder to see if the shoulder wasnt getting pushed back far enough but doesnt help tried new brass, tried sharpie maker on a case to see if i could see where it rubs with no marks on the case, trimmed the case shorter thinking make it was a short neck. I cant figure it out wondering if anyone else has had this same issue before?? Also wondered if i load it up light and fireform to the chamber if the next time i reload it would be ok from then on but not sure id it is safe to do this? Not sure how much of a crush on brass is ok that is.