I have a Savage 110E chambered in 22-250, the gun was my first center fire rifle that I received new in 1988. I have changed the stock to a boyds laminate and set the trigger to 3 lbs. The gun has had well over 1000 rounds through it and has become somewhat inaccurate.

What I want to do:

-re-barrel with a shilen pre-cut / pre-chambered barrel in either .308 or 6.5 creedmoor

Questions I have:

- do I need to re-place the barrel nut or recoil lug?
-are any modifications required to the bolt or bolt face?
-I'm not sure if the action is long or short
and I'm not sure if it is a staggered feed or center feed (the magazine well is attached to the action)
-does any of that matter?

Any and all suggestions are greatly appreciated.

Chad