Hello,

Last weekend I installed a Sav-1 trigger on my Axis 308 and installed it into a mdt lss chassis. After installiation i re-tested the trigger to make sure the adjustments we're still as l liked them. When I pull the trigger, it felt like there was a lot of over travel all of the sudden. I noticed the trigger bracket rocking backwards causing the safety switch to raise up. I tried to look down into the chassis to see what is going on in there but I wasn't able to see anything. All I know is that the bracket seems to be "sandwiched" between the chassis and action but when the trigger is pulled there is apparently room for the spring to decompress causing the movement. I'm not positive that this isn't normal but it doesn't seem correct to me and I don't remember it happening in the factory stock. I thought maybe I hadn't tightened the action screw enough but this wasn't the case. I checked the recoil lug and it seemed to be seated correctly. Has anyone else had this issue and know how to fix it?

Thanks