Hey guys,
I'm not sure that I have a problem, but it just doesn't seem to be right to me. THe problem that I am seeing is when I close me bolt and lock it. I can then push forward on my bolt and move it about .010" or so. I am having a problem with the primers working back out of the casing slightly after firing a primed round. I had to replace the firing pin spring on my 7mag and was trying to get it adjusted as to not puncture the primer and have any flash back towards me! I'm not sure if my description will be accurate, but I'm really not confident about pulling the trigger on a live round at this point! Any assistance would be helpful.

I'm also wondering if there are two or three washer in the bolt head/locking lug assembly. Mine only has two, but a friend of mine with a savage 308 said he has three. I'm thinking that I may wanna replace the bolt head, locking lug, and the washer/shims up front. Just not sure where to go from here.
Thanks
Jason