I just ordered a new Bell & Carlson Medalist stock for my 110 30-06. Yesterday I tried to install the action/barrel onto the new stock but I'm having an issue. If I install with the bolt removed then add the bolt, it will only close half way. If I install with a closed bolt (double checked for empty barrel and magazine) I can operate the bolt but the forward most screw is about 3/4 of a turn lose. If I tighten the screw, I can either not open the bolt (if in the closed position) or close it (if in the open position).

I've tried to run the bolt and disassemble to see if I find any rub marks but there is nothing visible. Aside from the area around the handle/tang, I can't imagine anywhere else it would be binding. Seems like the barrel needs to be shimmed slightly - but of course that defeats the purpose of a full length aluminum bedding block.

Anyone run into this issue or have any potential ideas for me?