Is it better to fully float the barrel all the way to where it connects to the action..or bed the top of the area where the barrel first makes contact with the stock? Not sure what it's called and have researched for days..but I get different opinions on every article and forum iv read. I read it stiffens the barrel and tames harmonics on one then in the same forum someone else says the contact on the bottom of the barrel in that area DESTROYS harmonics. I don't know what the area is called..buy its the half circle that rizes up from the stock to support the barrel where it connects to the action. It's floated right now and only contact is the two screws coming off bottom of action through the stock to action..just wang all the accuracy I can pull out of this baby..