Hi all

I just recently got around to putting my latest project together which includes a Savage target action, shillen bull barrel chambered for 6.5x47 Lapua, SSS heavy benchrest stock, DNZ rings, and Weaver T36 scope.

My problem lies in the fitment of the barrel / barrel channel in the stock. The gap on the right side of the barrel is huge and on the left side as you get toward the end of the forearm it almost touches the barrel !

It is not just slightly off - it's as if the action holes in the stock might have not been drilled straight?

Any advice on things to check for or does it sound as if I should just call SSS and see about replacement?

Thank you,
Matt