Results 1 to 9 of 9

Thread: Bolt head rubbing on barrel face?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-23-2016, 03:40 PM #1
    Screwyou1977
    Guest

    Bolt head rubbing on barrel face?

    Hi I'm new here and just converted my 111 30-06 to 308. Have a problem someone might be able to help me with.Problem is bolt is slightly rubbing barrel face.Bolt depth .135 and case protrusion .145 so I should have 10 clearance correct. Using Manson hs gauges closed on go without any resistance just like nothing in chamber. Wouldn't come close to closing on no go.So what's the problem? Parts shilen prefit , sss lug, stock bolt. Thanks!



    Last edited by Screwyou1977; 03-23-2016 at 04:07 PM. Reason: Forgot pictures
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Head spacing a Shilen barrel with a 111 too deep bolt face.
    By FredN in forum 110-Series Rifles
    Replies: 20
    Last Post: 06-06-2015, 06:57 AM
  2. Bolt rubbing on safety
    By RJTNC in forum 110-Series Rifles
    Replies: 7
    Last Post: 11-03-2014, 10:43 PM
  3. Bolt face/head size question- 22-250 vs 204
    By Brent in forum 110-Series Rifles
    Replies: 2
    Last Post: 01-10-2014, 10:54 AM
  4. Pre 66 barrel, bolt swap. can i switch pre 66 bolt face to modern bolt face?
    By Twodogs10mm in forum 110-Series Rifles
    Replies: 7
    Last Post: 06-02-2012, 02:04 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules