I'm having a bit of a problem with, I'm assuming, scope base alignment on my Model 12 F-Class. The one-piece base, rings and scope are all Nightforce. When I've got my scope zeroed, on a calm day, my windage adjustment is ~12moa right of center. According to Nightforce tech support it shouldn't be more than 1-2moa, if not zero. The base screws down to the action without any of the screws binding. When the rings are mounted the scope drops into the lower rings without any binding, or apparent mis-alignment. All the screws are torqued to specs. The scope tracks perfectly. What's the chance that my action has the base mounting screws holes located incorrectly right from the factory? Any history of Savage having problems with the mounting holes? I wish I still worked as a tool and die maker. Then I'd have the tools and instruments to measure and correct the problem.