I have an Axis that I converted to a 300 blackout. I noticed that my rifle does not strike the primer hard enough at times. I'm using CCI primers for my subsonic loads. Primer strikes are light, but it's making a dimple in the primer itself.

I know that Wolff offers a 32/36lb striker springs for Savage SA/LA rifles. Has anyone ever had issues with light primer strikes with their Axis. If yes, what did you do to resolve this issue?

I called Wolff and asked if I could use the 110 striker springs and they told me that it's a different length compared to Axis rifles.

I called Savage and the woman I spoke to suggested cutting some coils on the Wolff striker springs to fit in the Axis.

I'm going to take a part the entire bolt to clean it out to make sure that nothing is preventing the firing pin from making contact with the primer.

Any suggestions?