I recently bought a new model 10fcp in 308 win. 24" heavy fluted barrel. 5r 11.25" twist rifling. In the accustock. I want to squeeze every last bit of accuracy that i can out of it and was wondering id it was worth bedding over the alluminum bedding blocks in the factory stock or if i should just skim bed it? I stumbled onto a hadload today (after lots of other testing) that grouped 0.65" @ 100yds using a 168gr amax. Which is plenty accurate for 95% of what i will ever do with it BUT i like to take things to the next level and i wana squeeze it down even further if possible. So is it worth it to bed over the aluminum? Thanks for any input!