I loaded up some 175g M118 pulled bullets with some surplus WC846. The rounds I loaded in RP brass@46 grains were just a touch too hot showing very slight sighs of cratering.

I loaded some more in surplus brass@ 44 grains and well It took a few love taps on the bolt to get it open and it would not extract the case.I had to use an old cleaning rod and give it a tap as well.

Anyway what is the best way to pull the bullets so I can reload them to more friendly levels?

Should I get a collet puller for my press or the hammer inertia puller keeping in mind i want to reuse the bullets and powder.

Ok looked at the collet style and any one ever use the rcbs or forrester brand?