I have a model 10p and at the range today it shot flawlessly for about 20 rounds. I just put an aftermarket stock on it was and was resighting it in. The trigger hung (would not release) after firing a round. The bolt release also hung when I removed the bolt. Both released after I backed the action screw off to 25 inch/Ibs. That fixed both issues, but now the bolt only cocks (and stays cocked) after I open the bolt and run the lugs to the back of the chamber. Any ideas on what is going on? The stock is a Boyds and was free floated and glass bedded by a gunsmith. I took it off to clean off some bedding compound off the wood.