So I've pillar bedded my other two rifles, but they were both built from an Axis. On an Axis, the rear pillar can be a full size pillar with no interference with the sear. On the 111 I'm getting ready to bed, obviously that's not the case.

What are your thoughts on notching the backside of the rear pillar to clear the sear, or notching the sear so a full size rear pillar can be used?

This link will show pictures of what I'm referring to in case I'm not clear enough.

http://www.varminthuntinginternation...20Bedding.html

Any input is greatly appreciated.