Just received my stock in the mail today. Its a SA 10 4.4 its currently sitting at 40in lbs of torque on both action screws.
The front action isnt even sucked down on the bedding block all the way. When pressing on the barrel in a downwards motion the front action moves down as well thus closing the gap.
When pressing both the stock and barrel together in the same motion and looking through the dbm inlet you can see the dbm move outwards then sitting flush with the stock and the action begin to seat on the bedding block.
Does this picture of the dbm and bedding block look right? Im wondering if my dbm needs to be seated down more but thats as far as the cutout would let me atleast it seems. Did i install it too far out or something with my action screws length?
Reply With Quote
Bookmarks