Agghhh !!!

[shovelheadave]

So I'm going to build a new PD rifle.

Shilen Select SS Match arrived last week.

Really wanted a LH BVSS for this so, I called Numerich's and talked to the tech.......

Me - "are part number xxx and xxx 4.27" action screw spacing or, a 4.40" action screw spacing??"

Tech - "Let me go measure it........it's 4.40" for sure"

I sell my 4.27" action and order a new center feed LH 16 donor...... should be at the FFL tomorrow.

The stock arrives today....you guessed it....it's a 4.27".

Now I have three 4.27" stocks and no 4.40" stocks.

Ok, I'm done complaining now.

EDIT: Called Numerich today.....they were ETREEMELY helpful. Turns out the difference between the two part numbers is more than just the sling swivels. One is a 4.27” the other is a 4.40”. They’re going to get me all squared away.
Thumbs up to Numerich for making things right.