Hi everyone, I am brand new and just picked up my first Savage. I bought a 116 FHSS in 7mm magnum with the accustock and accutrigger. After returning home with the gun I took off the stock to have a look inside and to adjust the accutrigger at the same time. After exploring the gun I proceeded to put it back together. I got out the instruction manual and on page 31 there is a description of how to put the accustock back on the gun. Step number 2 of the reassembly says to be sure the washer is on the front action screw.....I did read the manual before I disassembled the gun to have a mental checklist of what is supposed to be there. When I disassembled the gun I did not find a washer on this action screw. In addition to this, on page 36 of my manual there is a schematic of the accustock that shows a spacer where the rear action screw goes. I did not find a spacer on my gun either. I disassembled this gun on a white tile floor and would have heard or could have easily seen if a washer or spacer fell out when I took the stock off. I just can imagine the gun coming from the factory without those two parts if they were supposed to be there. Am I missing something here and maybe this gun does not have those two parts or did the factory just fail to put them in? If anyone can shed any light on this issue I would be very grateful. Thank you in advance.