Hello.

So, the rifle is just about ready to take out to the range. I got the mount, the Sightron SIII, and Burris high Zee Rings. I spent a lot of time yesterday carefully centering the scope on the mount and fastening it down. As you may know, Burris has these plastic inserts that can give you up to 20 MOA extra elevation if desired; however, I mounted the scope with the standard 0 MOA inserts.

After placing the scope on the mount, I noticed that the fit was VERY tight. So, I tightened the screws down just enough so that I wasn't putting extreme pressure on the mount and scope. I decided to stop, just to be sure I was doing this right, take some photos, and show you what I mean.

[IMG][/IMG]

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

So, how does this look? Is the tightness associated with the Zee Rings pretty typical? I just dont want to hurt this 900$ scope....