I got a problem with a savage model 5 or a stevens peerless, I think its a model 5. when the bolt is pulled back the firing pin stays out and keeps the next shell from moving into place. if only one shell is in the mag tube it will move up through the cartrage lifter and to the bolt, when the bolt is moved forward the cartrage is a little low and misses the chamber. because the firing pin is out and stops it from moving into correct possision. when the bolt is drawn back the gun jams because ith cartrage will not release. took it apart and cleaned and oiled it. looks like it was worked on before.

Any ideas of eplanations on how it is suposed to work would be very much apreiciated.