i noticed that the recoil lug and it's slot in the accu-stock measure only .180" on my new 116, no one seems to offer an aftermarket precision lug in that size. is a new lug just a waste of time and $ with the accu-stock system?
i will be changing the barrel on this rifle. I also noticed that the accu-stock style lugs don't seem to have the alignment tab that corresponds to the slot in the receiver. when I have the lug off, if I were to reuse the old one, I could drill it and add a pin or small cap head screw for alignment. or is the orientation of the lug just not that critical with this system?
the barrel nut seems to be nearly the same size as the reciever. is there any concern that the nut may be in contact with the bedding rail? I could slightly relieve the rail ahead of the lug slot to be sure.
am I just overly concerned and none of this realy matters with the accu-stock?
Reply With Quote
Bookmarks