I know that this topic must have come up before but I searched the forum and can't find a relevant thread.

I have a model 10 in .308 winchester and the accu-trigger will not stay adjusted. I had it adjusted down near the bottom of the listed range (regular accu-trigger, not the target trigger). The trigger weight lowers by itself to 1 pound or less and the trigger locks up when I close the bolt. I read somewhere that you have to adjust the trigger to a higher weight to cure the problem. I adjusted the trigger to 2.5 pounds and then shot it today. After about 15 rounds the trigger started locking up again. I checked the trigger weight and it was down to 1 pound.

Is the a way to cure this problem without buying a new trigger and not having to adjust it to 5 or 6 pounds. I like a lighter trigger but can shoot OK with a 2.5 pound trigger.

Thanks
Chris