Results 1 to 3 of 3

Thread: WSM CRF to Pushfeed "firing Pin ???"

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-28-2013, 09:37 PM #1
    moecarama
    Status
    Offline
    Thread Starter
    Basic Member moecarama's Avatar
    Join Date
    Feb 2009
    Location
    Tn.
    Posts
    165

    WSM CRF to Pushfeed "firing Pin ???"

    Ok, this project is coming together,BTW short action small shank, I used magnum firing pin from CRf and really concerned about protrusion?
    Should I shorten to length by turning the adjustment nut of firing pin or get another firing pin? "
    I have replaced the CRF bolthead with a magnum push feed bolthead, installed new ejector,spring,retaining pin, extractor,spring and detent ball. I put it all together then checked firing pin protrusion; I am getting .076 protrusion. I beleive is a little too much since my 30.06 is set at .044 protrusion.
    Last edited by moecarama; 12-29-2013 at 12:21 AM.
    300WSM 26" 1:10 Med. Hvy. Varmit McRee Precision
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Savage 99: Savage Model 99 Identification "B" "D" "F" or ???
    By dbates in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 4
    Last Post: 02-03-2015, 04:31 PM
  2. Savage Axis and the "Stone Soup" farytale; thoughts on "upgradeability."
    By Theranthrope in forum Axis Series Rifles
    Replies: 7
    Last Post: 11-17-2014, 12:05 PM
  3. Savage 99: Savage 99 is now mine-is it a "B" or an "F" ? takedown ?
    By 303 Savage Man in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 5
    Last Post: 03-15-2014, 12:09 AM
  4. Need opinions """ UPDATE SORT OF """
    By rjtfroggy in forum Ammunition & Reloading
    Replies: 9
    Last Post: 06-23-2012, 06:14 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules